防噴水試驗裝置是依據標準IEC60529 IPX5/6、GB4208 IPX5/6等標準的相關條款要求制作，用于對檢驗具有防淋雨功能的器具或電器的防水性能進行測試。噴頭采用黃銅材質制成，適用于可能受到各種沖水或猛烈海浪影響的產品。

The water spray test apparatus is designed in accordance with the relevant requirements of standards such as IEC60529 IPX5/6 and GB4208 IPX5/6. It is used to test the waterproof performance of appliances or electrical equipment that require protection against splashing water. The nozzle is made of brass and is suitable for products that may be exposed to various water jets or heavy wave conditions.

功能參數：

1、 適用于進行產品的IPX5、IPX6測試。

2、 孔徑：ф6.3mm（IPX5）、ф12.5mm（IPX6）。

3、 IPX5、IPX6噴嘴螺紋聯接、快速更換。

4、黃銅材質。

5、 水流量：12.5±0.625L/min(IPX5)、100±5L/min(IPX6)

6、壓力表:0~2.5MPa

7、 試驗時間：不小于1min/m2(但不小于3分鐘)、用戶設定時間（控制系統控制）。

8、 噴嘴距外殼距離：2.5-3m(試驗人員控制)

9、IPX5:需提供水流速率為大于12.5L/min±5%，IPX6需提供水流速率為大于100L/min±5%干凈、無雜質的清水

Functional Parameters:

Suitable for IPX5 and IPX6 testing of products.

Nozzle aperture: ф6.3mm (IPX5), ф12.5mm (IPX6).

IPX5 and IPX6 nozzles feature threaded connections for quick replacement.

Made of brass.

Water flow rate: 12.5±0.625L/min (IPX5), 100±5L/min (IPX6).

Pressure gauge: 0~2.5MPa.

Test duration: no less than 1 minute per square meter (but not less than 3 minutes total), with user-defined settings (controlled by the control system).

Distance from nozzle to enclosure: 2.5-3m (controlled by the operator).

Requires clean, impurity-free fresh water with a flow rate greater than 12.5L/min ±5% for IPX5 and greater than 100L/min ±5% for IPX6.